Grabber WATER BASED Drywall Adhesive (28 oz) GDWAW

Home > Drywall Tools >

Our Price: $12.99

Product Code: GDWAW

Qty:

Description

Specifications

Grabber Drywall Adhesive (29 oz) GDWAV

Grabber® Professional Strength Drywall Adhesive is a non-staining waterproof adhesive specially developed for adhering drywall to structurally sound surfaces. The light colored adhesive is best suited for bonding gypsum board to wood or metal studs, laminating gypsum board to gypsum board and bonding gypsum board to concrete or block walls. Grabber® Professional Strength Drywall Adhesive will allow up to 50% reduction in the use of mechanical fasteners generally required in applications without adhesives. The unique characteristics of this product offer sufficient open time for the positioning of gypsum panels, excellent initial tack and rapid bond development with the ability to bridge minor framing irregularities that occur. Grabber® Professional Strength Drywall Adhesive should be used to provide for greater strength and safety in wall and ceiling assemblies without weak points.

Grabber Professional Drywall Adhesive Ideal for us on plywood, hardboard, gypsum wallboard, cold-rolled steel, galvanized steel and aluminum Exceeds the ASTM C-557 specification Strong initial tack allows panels to be positioned quickly without slipping Resists aging will not become hard or brittle Exposure to moisture or intermittent cold water immersion has little effect on the dried bond Fills irregularities and gaps in substrates, providing a more solid backup surface Do not use on polystyrene foam or rigid plastics such as A.B.S. or high-impact polystyrene. Do not use on vinyl-backed drywall

Helps eliminate nail pops and call backs
Bridges minor framing irregularities
Reduces sound transmission
Reduces fastener use up to 50-60%
Unaffected in cold weather use
Waterproof and weatherproof

Do not use on unlined expanded or extruded polystyrene foam. Not recommended for use on polystyrene or ABS plastic panels. Not recommended for use on prefinished vinyl covered gypsum panels.

3/8" bead - approx. 40 lin. ft./29 oz.

Instructions

All surfaces must be clean and free of dust, dirt, oil, mud, ice, snow, standing
water and other foreign substances prior to using adhesive.
GENERAL CONSTRUCTION USE:
Pre-cut and fit materials before applying adhesive. All materials should be
glued in place within 30 minutes after adhesive application. If work is
delayed, remove excess adhesive and begin again. Proper adhesive application is
obtained by double cutting the spout on each cartridge, producing 45 degree
angles opposite each other.
WOOD & METAL STUDS:
Apply a continuous 1/4" to 3/8" bead of adhesive to all framing members
starting 3-4 inches from the top and ending 3-4 inches from the bottom of where
each panels is positioned on the stud. Apply two 1/4" parallel beads of
adhesive on framing members where joints abut.. Position gypsum board and press
firmly in place. Use flat panels only. Do not use warped panels unless they
have been pre-bowed. Follow the fastening SCHEDULE for Adhesive Nail-on
Attachment in the Gypsum Association Manual (GA-201) or Table No. 47-G of the
Uniform Building Code. Perimeter fasten 16" O.C. for walls and ceilings, and
24" O.C. in the field of ceiling applications. Field fasteners are not required
for wall construction unless walls show evidence of warping. For shear wall
construction, field fasteners are required per I.C.B.O. Evaluation Service,
Inc. E.R. 2769.
LAMINATING GYPSUM BOARD:
Apply 1/4" to 3/8" zig-zag beads of adhesive 12" O.C. to the base ply or fixed
structure. Position and firmly press panels to the bonding surface. Follow
recommended fastening SCHEDULEs in Table No. 47-H of the Uniform Building Code
for two-ply construction or refer to the Gypsum Association Manual (GA-201) for
multi-ply construction. For single-ply application to concrete walls, concrete
should be cured at least 28 days and free of any release agents prior to using
adhesive. Permanent mechanical fasteners are required the same as for
applications to wood or metal studs. Field fasteners are recommended.
FIRE-RESISTIVE CONSTRUCTION:
Grabber® Professional Strength Drywall Adhesive is not a fire-rated adhesive.
However, this adhesive may be used in fire-rated assemblies providing the
framing, fastener size, type and spacing follow that of the system tested. No
deviation is permitted whether or not adhesive is used.
REFERENCE MATERIALS:
Additional information pertaining to the use of adhesives with gypsum board can
be found in the following publication:
Uniform Building Code: Section 4711
Uniform Building Code Standards: No. 47-2
Gypsum Association Manual: GA-201
ICBO Evaluation Service, Inc.: E.R. No. 2769

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Drywall Tools
Drywall Tools > Drywall Hanging Tools > Adhesives
Drywall Tools > Drywall Hanging Tools